XTUGA New MI7 7Pcs Wired Dynamic Drum Mic Kit Whole Metal Kick Bass Tom/Snare & Cymbals Microphone Set Use for Drums Vocal Other Instrument Complete with Thread Clip Inserts Mic Holder Use for Drums condenser vlogging stage microphone Vocal mic condenser
XTUGA New MI7 7Pcs Wired Dynamic Drum Mic Kit Whole Metal Kick Bass Tom/Snare & Cymbals Microphone Set Use for Drums Vocal Other Instrument Complete with Thread Clip Inserts Mic Holder Use for Drums condenser vlogging stage microphone Vocal mic condenser
Regular price
₱4,649.00
Regular price
Sale price
₱4,649.00
Unit price
per
The microphone is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and punch, and delivers studio quality sound even at extremely high sound pressure levels.
Big Drum Mic Element
Big Drum Mic Element: Moving Coil Dynamic
Polar Pattern: Uni-Directional Frequency
Response: 50Hz-15kHz
Sensitivity: -60db +/-3db (0 db=1 V/Pa at 1kHz)
Output Impedance: 5000 +/30% (at 1kHz)
Small Drum Mic Element
Big Drum Mic Element: Moving Coil Dynamic
Polar Pattern: Uni-Directional
Frequency Responce: 50Hz-14kHz
Sensitivity: -52db +/-3db (0 db=1 V/Pa at 1kHz)
Output Impedance: 5000 +/-30% (at 1kHz)
Condenser Mic Element
Condenser Mic Element: Electret CondenserPolar Pattern: Uni-Directional
Frequency Response: 50Hz-18kHz
Sensitivity: -45db +/-3db (0 db=1 V/Pa at 1kHz)
Output Impedance: 2000
Max Input SPL: 130 db (at 1kHz <1% T.H.D.)
S/N Ratio: 70 db
Power Supply: Phantom 48 V
GENERAL RULES FOR MICROPHONE USE:
1. Aim the microphone toward the desired sound source and away from unwanted sources. This may not be obvious or intuitive, Since Supercardioid microphones such as the microphone have narrow pickup patterns and can pick up sounds from the rear. Refer to Figure 1 on the following page
2. Place the microphone as close as practical to the desired sound source (refer to the table in the opposite column)
3. Work close to the microphone for extra bass response
4. Use only one microphone to pick up a single sound source
5. Use the fewest number of microphones as practical
6. Keep multiple microphones separated by a distance equal to at least 3X the distance to the nearest sound source
7. Place mics as far as possible from reflective surfaces
8. Use a windscreen when using the microphone outdoors.
Scenario Show
Installation Display
PACKING INCLUSIONS:
One big drum mic;4 small drum mics;
2 condenser mics with the holder;
4 thread clip ;thread inserts;
4 clamps for snare/tom mics;
2 wind screens for condenser mics