Skip to product information
1 of 16

VMIDirect

Daytech JH006-US Wireless Siren Alarm Sensor Model JH006 433Mhz for TA01 TA03 TA04 WiFi GSM Alarm System Voice Prompt Quick Flash Strobe Built In Rechargeable Alarm Convenient and Efficient For Business House Store Shop Room Office - VMI Direct

Daytech JH006-US Wireless Siren Alarm Sensor Model JH006 433Mhz for TA01 TA03 TA04 WiFi GSM Alarm System Voice Prompt Quick Flash Strobe Built In Rechargeable Alarm Convenient and Efficient For Business House Store Shop Room Office - VMI Direct

Regular price ₱749.00
Regular price Sale price ₱749.00
Sale Sold out
Shipping calculated at checkout.
Style

NOTED: We do not guarantee that it is compatible with other brand products. This product is applicable to some products of our brand.

WiFi GSM Alarm System Voice Prompt Quick Flash Strobe Built In Rechargeable Alarm Convenient and Efficient For Business House Store Shop Room Office 

Please pay attention: This sensor can not be used independently It must work with Daytech Alarm Host Model TA01 TA03 TA04. [Functions] work as a wireless siren needs to connect with Daytech alarm host 

20 wireless defense zones. 

At most 5 wireless remote controllers.  

Alarm with both voice prompts and quick flash strobe. 

Wireless learning code: adding new accessories, convenient, safe, and efficient. 0

Built-in rechargeable Lithium Battery.   [Description]

Alarm sound:100dB 

Frequency:433mhz

Battery standby time 6-8 hours.

Weight:200g  [Parcel listing] 1* siren 1* manual 2* screw [Noted] The wireless alarm siren can work as a wireless siren which code with Daytech wifi GSM Alarm host, Model TA01, Model TA03, Model TA04. It can match multiple wireless detectors and be controlled by a remote controller, make local alarm by sound and light when detectors triggered. 

 

Function Introduction Motion detector

Turn on the switch of the detector. When it detects the infrared heat energy of the human body, the LED light will be on and it will transmit the wireless signal. The host will alarm after receiving the wireless signal from it. Only after the detector pairs with the alarm host, the host can receive the alarm signal from it. Make the alarm host in the status of adding detectors. Turn the detector switch “ON”, The LED light will be one and the detector will transmit the wireless signal. The host will make a beep or voice prompts"adding completed”if it receives the signal. Cautions Do not face the glass door/window. Do not face the big object which is easy to swing. Do not face the cold and heat air vent or cold and heat source. The furniture, mediascape, or any other isolation should be away from the detecting scope. Do not install 2 or more detectors in the same area or it will cause interference when alarm. The installation height is 1.8-2meters from the ground. he detecting distance is less than 8meters, the transmitting distance is less than 80meters. Please test the distance after installing it. The obstacles will influence the distance.

View full details

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)